Honing Powder by repolished, grits 60 - 800, 1KG & 5KG

Repolished  Honing Powder is the best choice of a safe and non-acidic honing powder, it has been formulated to be used on a number of surfaces and designed to make using it very easy. It is best suited to calcium-based stone.

Suitable for Use On:
- Marble
- Limestone
- Travertine
- Cement-based Terrazzo

Key Features

Multi-purpose - This honing powder is most ideal for commercial and industrial use. This industrial abrasive can be used on walls, floors, worktops and more.

Grit Range - Repolished Honing Powder is available in various grits for more uses. It also allows the honing powder to meet expectations regardles of what type of stone it is used on.

Size -This honing powder is available in different sizes allowing you have just the amount that you need.

Repolished Honing Powder Size:
- 1 Kg
- 5 Kg


Benefits

Scratch & Etch Mark Removal - Repolished Honing Powder will not only remove etch marks and scratches from surfaces but also leave these surfaces with a dull, even and non-reflective finish. This product can also rid of traffic wear patterns that have built up over time.

Cleaning Action - Additionally, this honing powder can be used to assist in the cleaning of grout and textured materials, which means it can act as a great stand-alone product or work alongside other products

Method of Use:

Before using Repolished Honing Powder, it is recommended that you test the grit you have purchased on a discrete area before a full application to ensure the final result will meet your expectations. 


- Pre-wet the work surface with water
- Apply Honing Powder 
- Mix until a yoghurt-type conistency is achieved
- Use a slow speed rotary foor machine (154 to 300 RPM) fitted with a stiff to medium brush or black pad and water
- Add more water if the product begins to dry
- Remove the slurry with a wet vacuum
- Rinse with clean water
- Repeat the process with a finer grit

To achieve a polished finish after using this honing powder, we recommend Klindex KP85 or KP92 Polishing Powder with a white polishing pad. 

Repolished Honing Powder Grit Range:

60 Grit - 60-grit removes heavy scratching.  

After using 60 grit, you will also need other grits up to 300 for a matt finish. Or, you’ll need 400/800 grit for a higher or slight sheen.

100 Grit -100 Grit gets rid of scratching and if applied after 60-grit, this will start closing the surface tension of the stone back down

100 Grit Honing powder is ready to use on limestone, marble, travertine and concrete. 

After using 100 grit, you will also need other grits up to 300 for a matt finish. Or, you’ll need 400 grit for a higher or slight sheen

220 Grit - The 220 Grit will remove light scratching. 

It is also suitable for use on concrete surfaces and some granites to clean and re-polish the surface. 

After using 220 grit, you will also need other grits up to 300 for a matt finish. Or, you’ll need 400/800 grit for a higher or slight sheen.

You will also need other grits up to 300 for a matt finish or higher for a slight sheen use a  400 grit.

300 Grit -300 Honing powder hones surfaces to remove light scratching on concrete, limestone, travertine and marble. 

You’ll need a slow-speed rotary scrubbing machine fitted with a soft to medium to brush or a floor pad and water 

400 grit -Similar to 220 grit, the 400 removes light scratching on stone surfaces. 

In addition to limestone, travertine and marble, 400 grit is suitable for concrete flooring. 

Afterwards, use 800 grit to achieve a matt finish.

800 Grit - The 800 Grit will remove light scratching. 

It is also suitable for use on limestone, travertine, marble and concrete. 

 

Caution:
- Repolished Honing Powder is only to be used in well-ventilated areas
- Wearing gloves is advised when using this product
- Harmful if inhaled
- Harmful if comes in contact with skin
- Store in a cool, dry and frost-free environment
- Do not allow to freeze

Prices are exclusive of VAT

QUESTIONS?

Get in touch with our team if you need to check a price or have any questions about any of our products.

We can advise on suitability and help you find the right machine or consumables for the job, whether you're a domestic, commercial or industrial customer.

Either complete the enquiry form, or contact us using the details below.

GENERAL ENQUIRIES

Office: 01274 780291
Mobile: 07970 940052
Email: hello@repolished.co.uk

TECHNICAL ENQUIRIES

Mobile: 07966 555828
Email: rob@repolished.co.uk

Search